Permanent Magnet Motor for my 4ft Wind Generator:
This is the Motor that I chose for my 4ft genny.
Specs of the motor with voltage applied to the motor, configured on the treadmill
- 260 vdc
- 5100 RPM
- 5.0 amps
- CW Rotation
Specs of the Motor as a Wind Generator - (as per supplier)
RPM as it corresponds to voltage generated.
- 200 RPM = 7.1 VDC
- 300 RPM = 10.5 VDC
- 400 RPM = 13.8 VDC
- 500 RPM = 16.9 VDC
Recieved a bunch of emails about this unit and figured I would give you all a look at the insides of this motor. Check it out here --> PMG Insides